Dedicated HD Logo Camera for Ford Ranger T6 T7 T8 XLT F350 F250 F150 Pickup Edge Explorer
Dear customers, due to different countries or regions of the same model of the car parts may be different, the purchase must be based on your car parts or the original camera shape and size to decide. If you have any questions, please contact us. Otherwise, we will not bear the responsibility of the product and the original car parts do not match!!!
Reference for suitable car models
For Ford Ranger T6 T7 T8 XLT 2012-2019
For Ford Edge 2011-2014(Sport, Limited, ST, SE, SEL)
For Ford Explorer 2011-2016
For Ford F150 2004-2014(Fits the front grille and rear tailgate if you have no camera)
For Ford F250 2005-2007
For Ford F350 2005-2007
Image sensor: CMOS
Video format: NTSC
Signal mode: CVBS
White balance: Automatic
AGC and BLC: Automatic
Viewing angle: 140-170 degrees
Pixel: 1280 × 720
Signal to noise ratio: Better than 48db
Working voltage: DC 12V
Waterproof level: IP68
Working temperature(Deg.C): -30 – +80
If you also need a monitor, you can click the following picture to order.
140-170 Degrees Wide Angle
Dedicated camera is clearly visible day and night, allowing you to park safely
for ford ranger T6 T7 T8 XLT 2012-2019 camera for ford edge: 2011 2012 2013 2014 sport limited st se sel camera
IP68 Waterproof Level
for ford rangers camera
Due to manual measurement, there may be an error of 1-2mm.
for Ford Ranger F350 F250 F150 T6 T7 T8 XLT Pickup Flip Logo Edge Explorer Camera Rear View Monitor Kit
We have 3 package option
1. Camera set: camera×1, 6m video cable×1, 1mpower cable×1.
2. Camera and rectifier: camera×1, 6m video cable×1, 1mpower cable×1, DC 12V power rectifier×1.
3. Camera and wireless: camera×1, 2.4Ghz wireless transmitter receiver×1.
12V Power Rectifier
In some models of German and American cars, after engine starting, the output voltage is disturbed, the camera does not work properly, and the video signal output is also not normal, so there is severe interference, shaking, or the inability to switch screen inverts. This problem can be solved by using the rectifier.
Usually the rectifier can solve the interference for those model cars: Jetta, Lavida, Magotan, Passat, Touran, Octavia, Germany Series, Nissan Series, Ford, Europe and America Series.
When the engine starts, some German cars and American cars will output voltage interference. The power supply of the reversing lamp is not a pure DC power supply. Due to the very high operating voltage, the camera cannot work normally and the video signal output is not normal, so the host can see that there is serious interference, which can not switch the reversing screen normally.
If your screen shows those interference, you need buy the rectifier.
2.4Ghz Wireless Camera Video Transmitter Receiver
Video format: PAL, NTSC
Working temperature(Deg.C): -40 – +80
Working voltage: DC 12V
Work range: Up to about 50m
Transmitter/ receiver cable length: 1.5m
The installation instructions are for reference only. It is recommended that a professional installer install the camera.
1. Install the camera in the area of your car license plate light.
2. Adjust the lens of the camera to your best position.
3. Connect the video output(yellow wire) to the monitor.
4. Connect the power cable(red and black) to the power supply of the car’s reversing light, while reversing, the reversing monitoring system automatically start working, you can see the condition of the car tail clearly.
for Ford Ranger T6 T7 T8 XLT F350 F250 F150 Pickup Flip Logo Camera Night Vision Parking Monitor Rear View Camera
1. Our products must be strictly tested before being sent, and the products can only be sent to customers after they are proved to be intact.
2. You can mix all the items freely to place an order in our store.
1. If the customer’s order is successfully paid, we will choose a fast and reliable delivery method and send the package within 1-3 working days.
2. We are only responsible for shipping to the address filled in the order, please make sure that your shipping address is correct. We are not responsible for the incorrect or undeliverable address.
3. If you have not received your goods within buyer protection period, please contact us. We will try our best to track the shipment and get back to you as soon as possible with a reply. Our goal is try our best to make customers satisfied!
4. Import duties, taxes and charges occurred in buyer’s country are not included in the item price or shipping charges. These charges are the buyer’s responsibility.
Return & Refund
1. If there is any problems with our products, you have 7 days to contact us and 15 days to return it from the date it was received. If this item is in your possession more than 15 days, it is considered used and WE WILL NOT ISSUE YOU A REFUND OR REPLACEMENT. There are NO EXCEPTIONS!
2. The buyer will be responsible for the shipping fees to return the items.
We are committed to adhering to the highest standards in the industry and strive to make all customers satisfied! Your positive feedback is the best encouragement for us. If you are satisfied with our products and service, please give us 5-star and take pictures to share in the feedback column. If you are not satisfied with this purchase, please contact us.
Communication is the best way to solve the problem, rather than providing negative feedback or initiating a public dispute. Please do believe that during the transaction, no matter what happens, we will do our best to provide customers with quality service.