30Meters Deepth Underwater Camera

Products overview:

The product is an underwater video camera and fish finder

1,fish finder

2,underwater breeding monitoring

3,fishing monitoring

4,underwater viewing

5,underwater adventure

6,water well monitoring

product specification

1, monitor

Item	Specification
Monitor size (inch)	3.5″
System	PAL/NTSC
Monitor brand	Tianma, show digital LCD screen
resolution	320(RGB)*240
Viewing Angle (Degree)	40/60/60/60±10
brightness (cd/m2)	350
Display sizes (mm)	76.9×63.9×4.0
video	(1Vpp)1 video input
Adaptor	12V INPUT(7-14V)
Power	1.5+/-0.2W
language	Support 11 languages
Display size (mm)	70.08X52.56
connector	3.5MM AV OUT
function	The built-in lithium battery (can work 4 hours)
working temperature (Centigrade)	-10~+60
storage temperature (Centigrade)	-20~+70

2,Camera

Photographic chip types	Color1/4CCD
System	PAL /NTSC
Chip	PC1030N
pixel	500 (H) × 582 (V)(PAL)	510 (H) × 492 (V)(NTSC)
Lens visible Angle(Degree)	95
Lens size	2.2mm
Minimum illumination	2LUX
visible distance (water clear)
Power supply	DC12V
Biggest current consumption (Max)	400 mA
(S/N)	>=48dB
working temperature (Centigrade)	-10–+50
storage temperature (Centigrade)	-20 – +60
Work environment humidity	15%~85%RH
TV LINE	600 TV LINE

3, DVR Funbction:

DVR power supply: 12V

DVR work current: 200MA

storage medium: SD card (max 16G)

dagital clock and dagital calendar

DVR Total Pixels: 720X576 (D1)

picture snap and movie record

movie format: AVI

How to operation:

1,Boot

Connect all the connectors and press the power key, the system will start to work.

2,Menu Settings

1> Brightness

Press the MENU key to enter brightness setting, press the “+ -” key to set the brightness, and then press the MENU key again to quit the menu page after doing this.

2> Contrast

Continuously press the MENU key twice to enter contrast setting, press the “+ -” key to set the contrast, and then press the MENU key again to quit the menu page after doing this.

3> Color setting

Continuously press the MENU key for three times to enter the color setting, press the “+ -” key to set the color, and then press the MENU key again to quit the menu page after doing this

3,Image mode

Press the “image modee” key, and the images will overturn in all directions.

Recording

1,Boot

Connect all the joints and press the power key, the system will start to work.

2,Menu settings (MENU)

1> Press the MENU key to enter the menu page.

2> Press the MENU key again to select the setting content, including date setting, time setting, recording time setting, recording model setting, contrast setting and color setting.

3> After selecting the settings, press the + key to set the option upward, and press the – key to set the option downward.

4> After finishing setting, press the QUIT key to quit the settings.

3,Record (+)

1> Press the + key to start recording. On the upper left corner of the display will show the recording mark, on the lower left corner will show the recording time.

2>After recording one package, it will stop recording automatically then packaging it and save it into the SD card.(each package is recorded as long as the menu setting, such as 5S 10S 30S 60S 120S)

3> Press the + key to quit while recording.

Note: this “record” key can not afford continuously record, it can only record one package at one time, it you want to record again after finishing the former one, you should press the + key again.

4,Take pictures (DEL)

Press the DEL key to take a picture; it will save it into the SD card automatically.

5,Continuously record (REC)

1> Open the menu to enter the recording model setting, set it as AVI model.

2> Press the REC key to start continuously recording, what you have recorded will be automatically packaged and saved according to the recording time in your menu setting.

3> During the recording process, press the REC key to quit recording and the content will be packaged and saved automatically.

Note: while continuously recording, pressing the REC key will not stop recording at once until finishing one package. If shutdown or cut off the power or some other methods to forcibly stop recording, the content can not be saved.

6,Continuously take pictures(REC)

1> Open the menu and enter the recording model setting, set it as PICTURE model.

2> Press the REC key to start continuously taking pictures.

3> Press the REC key again to quit continuously taking pictures.

7,View the video(-)

1> Press the – key to show the saved recorded packages, on the lower left

corner will show the quantity of the saved recorded packages, on the

lower right corner will show the recorded date and time.

2> Press the – or + key again to select the recorded package you need to view.

3> Press the MENU key to start playing the selected recorded package.

4> Press the QUIT key to quit the current operation.

8,View the pictures(QUIT)

1> Press the QUIT key to show the saved pictures, on the lower left corner will show the quantity of the saved pictures, on the lower right corner will show the date and time of the pictures.

2> Press the – or + key to select the picture you need to view.

3> Press the QUIT key to quit the current operation.

9,Delete (DEL)

1> Delete the video

Press the – key to enter the saved recorded packages, press the + or – key to select the recorded packages you need to delete, then press the DEL key to delete them.

2> Delete the pictures

Press the QUIT key to enter the saved pictures, press the + or – key to select the pictures you need to delete, then press the DEL key to delete them.

Package: